C2 Photo Album

album:May 2022

Turning for the Front Bearing Cover for Axle I drivers side
C2-800-1898v3.jpg
C2-800-1899v3.jpg
Roughing out of the turbogenerator turbine disc on the big DSG lathe.
Turning for the Front Bearing Cover for Axle I drivers side.
C2-800-1900v3.jpg
C2-800-1901v3.jpg
Turning for the Front Bearing Cover for Axle I drivers side.
Initial turning of the rear bearing cover for axle III drivers side.
C2-800-1902v3.jpg
C2-800-1903v3.jpg
Roughing out of the turbogenerator turbine disc on the big DSG lathe.
The 'Boat' ready for its race across the cob, competing against the Madoc Yacht Club
C2-800-1904v3.jpg
C2-800-1905v3.jpg
Blanche at Tan-y-Bwlch on the Woodland Wanderer service which Paul drove on Saturday.
Emily and Billy look at home on the Blanche
C2-800-1906v3.jpg
C2-800-1907v3.jpg
As well as working on the C2, Matty and Paul fetched the 'Boat' from Minffordd in readiness for its race. Here they are about to depart from Minffordd. This section has a good gradient but a low bridge, so the mast and sail are dismounted and gravity will provide the motive power.